fb4XG@V7 FPGA Card Quad Port SFP+ 1/10 Gigabit Ethernet PCI Express FPGA Card
fb4XG@V7 FPGA Card Quad Port SFP+ 1/10 Gigabit Ethernet PCI Express FPGA Card
The fb4XG@7 series is a high performance OEM hardware platform for 10 Gigabit Ethernet with quad port SFP+ network interface. The standard configuration is based on Xilinx Virtex7 VX690T FPGA.
The card is also offered with a variety of different FPGAs to provide flexibility for the intended application.
As an optional feature, the card can be fitted with two SATA connectors which can provide connectivity to a wide range of standard storage devices directly to the FPGA NIC.
The fb4XG@7 series is a high performance OEM hardware platform for 10 Gigabit Ethernet with quad port SFP+ network interface. The standard configuration is based on Xilinx Virtex7 VX690T FPGA.
The card is also offered with a variety of different FPGAs to provide flexibility for the intended application.
As an optional feature, the card can be fitted with two SATA connectors which can provide connectivity to a wide range of standard storage devices directly to the FPGA NIC.
fbC4XGg3 – 1/10GE Capture Card- Quad port SPF/SFP+ capture card supporting 4 x 1/10GE, PCIe Gen3 x8 lanes
The Silicom Denmark fbC4XGg3 is a 4 x 1/10GE capture card that performs at full line rate with zero packet loss, on all four interfaces. Even while providing the full suite of features offered via fbCAPTURE API.With its PCIe Gen3 support, it is without bottlenecks, and is ideal for interfacing to multiple 1/10 Gigabit Ethernet links. This can be as individual links or in a load-sharing or redundancy configuration, directly from network taps, via SPAN ports or similar devices.
It is a high performance OEM hardware platform with four SPF/SFP+ ports, allowing for optimal flexibility in connectivity. The card allows utilization of the transmission capabilities of these in conjunction with fbCAPTURE features.
The fbC4XGg3 is part of the fbCAPTURE family which provides a powerful and flexible Software API, as well as standard libpcap integration. Through the integration of fbCAPTURE API, applications gain support for all fbCAPTURE cards, covering Ethernet speeds from 1GE to 100GE.
Host Interface:
- Physical bus connector: 8-lane PCIe
- PCIe bus type: 1-8 lane PCIe Gen1/Gen2/Gen3
Network Interface:
- IEEE standard: IEEE 802.3 10 Gbit/s Ethernet
- Physical interface: 4 x SFP+ ports
- Supported SFP+ modules: Multimode SR (850 nm), singlemode LR (1310 nm), multimode LRM (1310 nm), singlemode ER (1550 nm) or Direct Attached Copper (Twinax)
- Data rate: 4 x 10 Gbit/s
- Ethernet PHY directly embedded in FPGA for full packet control
Configuration:
- 16 bit fast parallel programming interface from supporting preprogrammed controller
- Configuration flash supports two boot images with automatic fallback to fail safe image if first image fails
- Support for encrypted FPGA bit file (optional)
- Upload of FPGA configuration to flash via PCIe
General Technical Specifications |
|
On Board Clock: | PCIe clock: 100MHz 125 MHz oscillator 156.25 MHz oscillator 150 MHz oscillator for SATA (optional) |
On Board Memory: | 2 x 64 bit DDR3@1600MT/s 4GB (total 8GB memory) 1 MB user configurable space in flash for permanent storage 1 x 36 bit QDRII+@2200MT/s 144 Mb / 288 Mb / 576 Mb (optional) |
FPGA: | fB4XG@V7690: Xilinx Virtex7 XC7VX690T-2 fB4XG@V7693: Xilinx Virtex7 XC7VX690T-3 fB4XG@V7330: Xilinx Virtex7 XC7VX330T-2 Xilinx Virtex7 XC7VX415T (optional) |
Environment: |
|
Physical dimensions: | half length, standard height PCIe |
Power consumption: | less than 6W with uninitialized FPGA |
Operating temperature: | 0 – 55°C, 30 – 130°F |
Operating humidity: | 20 – 80% |
Hardware compliance: | RoHS, CE |
Passive cooling: | no on-board fan required |
Active cooling: | optional |
Additional Board Support: | On board temperature sensor Board status LED 2 user configurable dual color LED FPGA controlled Link and Activity LED for each port PPS clock synchronization connector 2 x SATA connector (optional) |
Optional Intellectual Property Support: | Flash configuration I/F 8 lane PCIe DDR3 Memory controller QDRII+ Memory controller Fast Ethernet MAC (optional) MDIO controller (optional) I2C controller (optional) SPI master I/F (optional) TCP-offload engine (optional) |
P/N |
Description |
Notes |
fb4XG@V7 | Quad port SFP+ card supporting 4x1GE/10GE, PCIe Gen3 x8 lanes, optional SATA connectors | RoHS Compliant |
Host Interface:
- Physical bus connector: 8-lane PCIe
- PCIe bus type: 1-8 lane PCIe Gen1/Gen2/Gen3
Network Interface:
- IEEE standard: IEEE 802.3 10 Gbit/s Ethernet
- Physical interface: 4 x SFP+ ports
- Supported SFP+ modules: Multimode SR (850 nm), singlemode LR (1310 nm), multimode LRM (1310 nm), singlemode ER (1550 nm) or Direct Attached Copper (Twinax)
- Data rate: 4 x 10 Gbit/s
- Ethernet PHY directly embedded in FPGA for full packet control
Configuration:
- 16 bit fast parallel programming interface from supporting preprogrammed controller
- Configuration flash supports two boot images with automatic fallback to fail safe image if first image fails
- Support for encrypted FPGA bit file (optional)
- Upload of FPGA configuration to flash via PCIe
General Technical Specifications |
|
On Board Clock: | PCIe clock: 100MHz 125 MHz oscillator 156.25 MHz oscillator 150 MHz oscillator for SATA (optional) |
On Board Memory: | 2 x 64 bit DDR3@1600MT/s 4GB (total 8GB memory) 1 MB user configurable space in flash for permanent storage 1 x 36 bit QDRII+@2200MT/s 144 Mb / 288 Mb / 576 Mb (optional) |
FPGA: | fB4XG@V7690: Xilinx Virtex7 XC7VX690T-2 fB4XG@V7693: Xilinx Virtex7 XC7VX690T-3 fB4XG@V7330: Xilinx Virtex7 XC7VX330T-2 Xilinx Virtex7 XC7VX415T (optional) |
Environment: |
|
Physical dimensions: | half length, standard height PCIe |
Power consumption: | less than 6W with uninitialized FPGA |
Operating temperature: | 0 – 55°C, 30 – 130°F |
Operating humidity: | 20 – 80% |
Hardware compliance: | RoHS, CE |
Passive cooling: | no on-board fan required |
Active cooling: | optional |
Additional Board Support: | On board temperature sensor Board status LED 2 user configurable dual color LED FPGA controlled Link and Activity LED for each port PPS clock synchronization connector 2 x SATA connector (optional) |
Optional Intellectual Property Support: | Flash configuration I/F 8 lane PCIe DDR3 Memory controller QDRII+ Memory controller Fast Ethernet MAC (optional) MDIO controller (optional) I2C controller (optional) SPI master I/F (optional) TCP-offload engine (optional) |
P/N |
Description |
Notes |
fb4XG@V7 | Quad port SFP+ card supporting 4x1GE/10GE, PCIe Gen3 x8 lanes, optional SATA connectors | RoHS Compliant |